MS Scaffolding Accessories
MS scaffolding accessories refer to components used in scaffolding systems that are made from mild steel (MS). They also plays very important role in Cuplock scaffolding. Accessories in scaffolding systems may include items like Couplers, bracing, tie rod, wing and anchor nuts etc. which are essential for the stability and functionality of the scaffold.
Single Coupler (Putlog)
Designed for safe positive securement of scaffold tube between opposing surfaces. Weight (Kg) 0.65kg,
Plated or Powder Coated. These fit in all standard
grease guns and can be used as a general purpose coupler.
Tie Rod
Tie Rod with wing nut and anchor plate. Tie rod
available in 10/12 mm, 15/17mm, 20/22mm.
Wing nut weight is 0.28 Kgs.
Anchor nut weight is 0.66 kgs
Anchor Nut
Anchor nuts provide a permanent nut element on the inside of the joint so that a skin, access panel, fairing, or other member can be attached with a screw.
Swivel Coupler (Sheet/Forged
Swivel Couplers provide the same tough, positive grip as double couplers but enable two scaffold tubes to be connected together at any angle. Designed for maximum safety in load bearing situations, they are used especially for cross-bracing.
Fix coupler (Sheet/Forged)
Weight (Kg) 1.20kg, Minimum Slip Load – 8.5kN, Minimum Distortion Load – 17.0kN, Finish – Zinc Plated, Gold Passivated or Powder Coated.
Clamps also available
Wing Nut
Wing nuts feature internal threading, so they can run up and down the bolts with which they are used. The main benefit of wing nuts, however, is their ease of installation and removal. Weight : 0.280 Gm
